Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)

Product Details
Customization: Available
After-sales Service: Available
Warranty: One Year
Manufacturer/Factory
Gold Member Since 2021

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Plant Area
>2000 square meters
  • Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)
  • Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)
  • Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)
  • Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)
  • Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)
  • Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)
Find Similar Products

Basic Info.

Portable
Non Portable
Form
Flatbed
Application
Industrial
Type
Industrial High-definition X-ray Detector
Certification
ISO
Customized
Customized
Alarm Form
Audible Alarm
Electronic Beam Energy
4/6 Mev
Transport Package
Wooden Case Packed
Trademark
Power Tree
Origin
Liaoning, China
HS Code
8543100090
Production Capacity
100PCS/Year

Product Description

 
Product Description

Electron Linear Accelerator is used for the field of non-destructive testing on iron and steel casting,solid rocket engine,pressure vessel,large-sized boiler,container.

(1) Radiator
(2) High-voltage Modulator 
(3) Control system
(4) Constant Temp cooling system
(5) Safety Interlock device
(6) Voltage stabilization power supply
(7) Connection System

Detailed Photos

Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)

Product Parameters

Technical parameter

Model PTMegaL2  PTMegaL 4/6 PTMegaL 6/9 PTMegaL 12 PTMegaL 15
ElEctronic beam energy(MeV) 4/6 6/9 12 15
X-ray dose rate(cGy/min.m) ≥200  ≥800  ≥3000  ≥8000  ≥10000 
Focal spot size(mm) ≤1.5  1.5~2 
Homogeneity >75% >60% >55% >50% >50%
Asymmetry <±5%
Radiography thickness(mm)  40-200  50-280  70-380  80-420 80-480
Radiography sensitivity 1-2T(ASTM)
Time for dose stable(s)  <10s
Leakage  Outside of main beam, on the spherical surface being part from the target 1m, average dose rate in any areas of 100cm2 is no more than 0.1% comparing with the dose rate at the 0 degree at the axis wire being part from the target 1m.

1) 6MeV can change energy between 4MeV&6MeV, 9MeV can change energy between 6MeV/9MeV.
2) Sensitivity: Thickness between 75-380mm A3 steel, sensitivity reach 1-2T(ASTM).
3) Radiation field: Cone beam ±15°
4) Radiation average: >60%(radiation at ±7.5°/radiation at 0°)
5) Radiation symmetry: Asymmetry ≤±2%, at any point of 7.5° of the beam cone
6) Radiation stability and time required: Radiation stability ≤2%, within 10s after radiation on. 
7) Laser positioning: Drift between Light spot and radiation main beam≤±15mm
8) Long time radiation: continuous radiation for 8 hours, dosage rate fluctuation within 8 hours  less than 2%. 
9) Environment requirement: 
Ground resistance <0.1Ω
Temperature< 45ºC
10) Safety interlock device:
Controller, radiation head, modulator of linear accelerator all set with enough emergency key; safety interlock with all protect door during installation.
Safety interlock, alarming system functions as following:
a. Interlock between protect door and accelerator: when protect door not close well, accelerator can not spill, and hint on the system;
b. Installs with 4key switch on interlock box, if remove any of them, accelerator can not spill;
c. Interlock between emergency switch inside of protect room and accelerator: when accelerator is spilling, if any operator mis-stayed inside of room, operator can prompt press emergency key to decrease mis-radiation;
d. 10seconds sound-light alarming before spilling, if any operator mis-stayed inside of room, within 10seconds can adopt emergency stop step;
e. Sound-light alarming during spilling to avoid person mis-step into protect room;
f.Interlock between radiation head switch and accelerator: avoid electrical shock accident;
11)Dimension1500x800x680mm, weight 700kg
12) Max radiation automatic searching
13) Power: <30kW

Packaging & Shipping

Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)Industrial X-ray Electron Linear Accelerator (Ptmegal 4/6)

After Sales Service

1. After-sales consultation: The email sent by the customer due to various problems during normal use will be responded to within 1 working day;

2. The entire equipment is guaranteed for one year, and it is responsible for maintenance outside the period. Only the material cost is charged for maintenance;

3. After the warranty, the professional after-sale service team will provide perfect technical support, and help customer solve problems encountered with using our product.

FAQ

1. Are you manufacturer?
Yes, we are a professsional manufacturer of x-ray machine in north of China.
Stable quality and foremost service always be the key that we focus on.


2. How long is your lead time?
Normally it's about 30-40days after order confirmed.

3.How about the warranty and services?
Provide one year warranty and lifetime technic support.
Accept to send our engineer to your country for training in additional cost.
Free training one-on-one in our factory for free.


4. How long is the guarantee period of the machines? When does it start?
The guarantee period of our equipment is one year, calculated the date from when it's installed. During the guarantee period, we provide normal damaged spare parts for free. After the guarantee period, we only take the cost of components.

OEM & ODM are available.

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier