The roughness profilometer measures the contact between the instrument's stylus and the measured surface through sliding. It can directly measure the surface roughness of certain parts that are difficult to measure, such as holes, grooves, etc. It can also directly read or depict the shape of surface contour curves according to certain evaluation standards, and the measurement speed is fast, the results are reliable, and the operation is convenient. At the same time, it can measure the contour shape, straightness, angle, convexity, logarithmic curve, groove depth, groove width and other parameters of various precision mechanical parts. This series of instruments is widely used in industries such as mechanical processing, motors, automotive parts, motorcycle parts, precision hardware, precision tools, cutting tools, molds, optical components, etc. Can measure bearings, needle rollers, rollers, motor shafts, crankshafts, cylindrical pins, piston pins, pistons, valves, valves, gears, oil pump nozzles, hydraulic components, pneumatic components, spinning machine accessories, etc.
1. The three-axis Hall rocker control allows for free three-axis linkage, making operation more convenient (the left and right up and down measuring needles lift and fall, and the measurement starts and stops with just one click)
2- Can automatically detect duplicate measurements for single product batch testing
3. The material of the measuring needle is made of high hardness alloy imported material, which is wear-resistant and durable
4. The software system is jointly developed by university professors and senior professors from the Axis Research Institute, with independent intellectual property rights and source code that can be upgraded for free for life.
Measuring principle:
The measurement principle of this instrument is the Cartesian coordinate measurement method, which uses X-axis and Z1 axis sensors to measure the coordinate points of the surface profile of the measured part. Through electrical components, the coordinate point data measured by the sensor is transmitted to the upper computer. The software performs mathematical operations on the collected original coordinate data and marks the required engineering measurement items.
This instrument can be compared with imported instruments in terms of performance, and all indicators have reached international standards. The instrument meets the requirements of national standards GB/T3505-2000, GB/T6062-2001, GB/T10610-1998, as well as international standards ISO5436, ISO11562, and ISO4287.
Contour measurement function:
Dimensions: including horizontal distance, vertical distance, linear distance, radius, diameter
Angle: including horizontal angle, vertical angle, and angle
Position tolerance: including parallelism and verticality
Shape tolerance: including straightness, convexity, and arc profile
Auxiliary generation: including auxiliary points, auxiliary lines, and auxiliary circles
Roughness analysis: Ra,Ramax,Ramin,Rasd,Rp,Rpmax,Rpmin,Rpsd,Rv,Rvmax,Rvmin,Rvsd,Rz,Rzmax,Rzmin,Rzsd,R3z,Rc,Rcmax,Rcmin,Rcsd,Rt,Rq,Rqmax,Rqmin,Rdsd,Rsk,Rskmax,Rsmin,Rsksd,Rku,Rkumax,Rkumin,Rkusd,Rsm,Rsmmax,Rsmmin,Rsmsd,Rs,R△a,R△amax,R△amin,R△asd,R△q,R△qmax,R△qmin,R△qsd,Rk,Rpk,Rvk,Mr1,Mr2,Rλa,Rλamax,Rλamin,Rλasd,Rλq,Rλqmax,Rλqmin,Rλqsd,Rδc,Rpc,Rmr
Ripple analysis: Wa,Wamax,Wamin,Wasd,Wsa,Wca,Wa08,Wc,Wcmax,Wcmin,Wcsd,Wt,Wz,Wzmax,Wzmin,Wzsd,Wp,Wpmax,Wpmin,Wpsd,Wv,Wvmax,Wvmin,Wcsd,Wq,Wqmax,Wqmin,Wqsd,Wsm,Wsmmax,Wsmmin,Wsmsd,Wsk,Wskmax,Wskmin,
Wsksd,Wku,Wkumax,Wkumin,Wkusd,W△q,W△qmax,W△qmin,W△qsd,Wδc,Wmr
Original contour analysis: Pa,Pt,Pp,Pc,Pv,Pz,Pq,Psm,Psk,Pku,RzJ,Rpq,Rvq,Rmq,Pmr,P△q,Avh,Hmax,Hmin,Area,Pδc,Tilta
Detailed parameters:
| Parameter Name |
|
Parameter data |
| measuring range |
X-direction driver |
130mm |
| |
Z1 |
Profile measurement range |
20mm |
| |
Z1 |
Roughness range |
±1500μm |
| |
Z1 |
Resolution of 0.02 microns |
| |
Z-axis height (column) |
550mm |
| |
Detectable minimum inner hole |
10mm |
| Contour |
Linear accuracy |
±(0.7+|0.12H|)μm |
| |
circular arc |
±(1.2+R/12)μm |
| |
angle |
±1′ |
| |
Straightness |
0.5μm/100mm |
| Roughness |
Linear accuracy |
≤±5% |
| |
Residual noise |
≤ 0.005 μ M |
| |
Repetitive stability |
Trial value 3% |
| |
Cutoff wavelength |
0.025,0.08,0.25,0.8,2.5,8mm |
| |
Evaluate length |
λcX1,2,3,4,5 |
| Sensor |
style |
USA |
| |
resolving power |
0.02μm |
| |
place of origin |
USA |
| Climbing angle |
Up 77 degrees, down 88 degrees |
| Roughness assessment |
Ra,Rz,(Rmax,Ry),Rt,Rp,Rpm,Rz(jis),Rv,R3z,Rs m,Rsk,Rk,Rc,Rpk,Rvk,Mr1,Mr2 |
| Measurement speed |
0.05-20mm/s |
| Z-axis speed |
0.05-20mm/s |
Packaging & Shipping
After Sales Service
1. After-sales consultation: The email sent by the customer due to various problems during normal use will be responded to within 1 working day;
2. The entire equipment is guaranteed for one year, and it is responsible for maintenance outside the period. Only the material cost is charged for maintenance;
3. After the warranty, the professional after-sale service team will provide perfect technical support, and help customer solve problems encountered with using our product.
FAQ
1. Are you manufacturer?
Yes, we are a professsional manufacturer in China.
Stable quality and foremost service always be the key that we focus on.
2. How long is your lead time?
Normally it's about 30-40days after order confirmed.
3.How about the warranty and services?
Provide one year warranty and lifetime technic support.
Accept to send our engineer to your country for training in additional cost.
Free training one-on-one in our factory for free.
4. How long is the guarantee period of the machines? When does it start?
The guarantee period of our equipment is one year, calculated the date from when it's installed. During the guarantee period, we provide normal damaged spare parts for free. After the guarantee period, we only take the cost of components.
OEM & ODM are available.
Audited Supplier 
){kind=link}